The CaviLocK CL200 is a residential range of passage and privacy handles suitable for cavity and surface sliding doors.
When fitted to a cavity sliding door the CL200 allows the door to slide completely back inside the cavity so that the front
of the door is flush with the face of the jambs. There are 4 options available for the CL200 - these include Passage,
Privacy, Latching Pairs and for low level security the Privacy can be handed one side.

CL200 Passage The CL200 Passage set is designed for both residential and light commercial use. The front clashing plate incorporates a recessed edge pull to allow the door to be withdrawn from the cavity when fully open. This recessed edge pull may be replaced with a flush front edge plate for surface sliding applications. The CL200 has deep recessed side pulls which allow for positive hand grip making even heavy doors easy to slide. CL200 Passage Features & Benefits Strong pressure die-cast construction. Allows door to slide completely into cavity flush with the jambs. Handle clamps around door for added strength. Available in a range of metallic and powdercoated finishes. Concealed screw fixings on sides. Quick and easy to fit. Suitable for single or bi-parting double doors. Fits doors 33-40mm thick.

CL200 Privacy Set The CL200 Privacy set is the locking version of the Passage set. It has the same look and dimensions but with the addition of one of the following locking functions: Privacy Set with emergency release (Type A). Latching Set – snib both sides (Type B). Privacy Set without emergency release (Type B or C depending on handing). Privacy Set – a combination of one of the above, latching onto a Passage set with a striker (Type A or B or C+E). The CL200 Privacy set can be configured to latch in the following ways: Auto Latching – door automatically latches every time it is closed. Manual Latching – door has to be manually latched after closing. The CL200 Privacy comes with all components and instructions to allow the installer to configure the CL200 for either manual or auto latching on-site. The CL200 Privacy set is ideal for use on sliding doors to toilets, bathrooms, ensuites, serveries, etc. and as a latching handle for double doors. It is not recommended to use the CL200 Privacy set as a locking/latching device in a commercial situation.

CL200 Privacy
Features & Benefits

• Manual or Auto latching.
• Suitable for left and right hand doors.
• Easy to operate latching snib.
• Matches the CL200 Passage set.
• Available for double doors.
• Available in a range of metallic and powdercoated finishes.
• Supplied with full fitting instructions.
• Suitable for doors 33mm to 40mm thick.